Project Atlas ICBM development

[MJR]

You only have one vernier? What so you mean the vernier mesh is supposed to be inside the multistage mesh?

 

[Star Voyager]

Good mrning gentlemen,
For Mr. MJR, I meant the Multistage folder. Sorry about the mix up. And yes, I do have only one vernier and it seperates.

 

[MJR]

Look in the mesh folder. There should be vernier_1 and vernier_2. On your picture you have two. One on the left and one on the right.

 

[Star Voyager]

Good morning gentlemen,
For Mr. MJR, they are in the mesh folder. But this is what your multistage config says:

[BOOSTER_1]
N=1
MeshName="Multistage\vernier"
Height=0.5
Diameter=0.4
EmptyMass=400
FuelMass=700
Thrust=5000
off=(0,0,-1)
BurnTime=400
eng_1=(0,-1.4,-7)
eng_2=(0,2,-7)
eng_diameter=0.3
ENG_TEX=Exhaust2
ENG_PSTREAM1=Exhaust2

And the only mesh inside the multistage folder is the ICBM mesh.

 

[MJR]

I am uploading another update. Everything is supposed to look like that. What are you confused about?

 

[Star Voyager]

Good morning gentlemen,
For Mr. MJR, the config will look for a vernier mesh inside the multistage folder. If it doesn't, Orbiter will go into CTD.

 

[MJR]

That is how the booster part works. Have you tried it?

 

[Star Voyager]

Good morning gentlemen,
For Mr. MJR, yes I have tried it and I get CTD.

 

[MJR]

Try the new update.

 

[Star Voyager]

Good morning gentlemen,
For Mr. MJR, I don't get CTD anymore, but there is still only one vernier and it seperates.

 

[MJR]

Show me a picture of it. Make sure that it is clear so I can see. I don't know what to do for the separation for now. I try to fix it.

---------- Post added at 06:42 PM ---------- Previous post was at 06:30 PM ----------

Try it now. The best bet for now is to wait for the guidance file and maybe it can release the payload before the verniers separate. If not, you should just let the ICBM burn its main engines and establish a sub-orbit and then jettison both.

The second vernier keeps diassapering after one trial.

 

[Star Voyager]

Good morning gentlemen,
For Mr. MJR, this is what I mean:

View attachment 2794

View attachment 2795

Are these clear enough?

 

[MJR]

Yeah. This is ridiculous. I had two verniers and now only one shows up. If I make it a spacecraft3 vehicle then it can be jettison which is not what we want done. If I make it a booster, then the same thing apllies. I am stumped.

---------- Post added at 07:13 PM ---------- Previous post was at 06:58 PM ----------

It has two now. It has smoke though. Hope that isn't too big of a let down for you.

 

[Star Voyager]

Good morning gentlemen,
For Mr. MJR, this isn't a major issue. I look forward to looking at it.

 

[MJR]

That is about it for now then. Have fun.

 

[Star Voyager]

Good morning gentlemen,
For Mr. MJR, it's absolutely perfect :speakcool:! All we need now are better textures.

 

[MJR]

Agreed. I am not good at texturing though. I can't wait until astrosammy is done with his part on the project. It is going to be awesome. Not only is there a guidance file, but a animated silo, tiles, and a base.

---------- Post added at 10:36 AM ---------- Previous post was Yesterday at 07:27 PM ----------

Liber has updated the mesh and fixed some of the minor faults. Thanks!

 

[Star Voyager]

Good morning genltmen,
For Mr. MJR, I got your newest update and I got a CTD. Here is the log:

**** Orbiter.log
Build Sep 29 2006 [v.060929]
Devices enumerated: 2
Devices accepted: 2
==> RGB Emulation
==> Direct3D HAL
Found 0 joystick(s)
Module AtlantisConfig.dll [API v.060425]
Module DGConfig.dll [API v.060425]
Module universalParachute.dll [API v.060425]
Module TrackIR.dll [API v.060425]
TrackIR module not found.
Module TimeJumpMFD.dll [API v.060425]
Module TestPilotsMFD.dll [API v.060425]
Module ScreenCapture.dll [API v.060425]
Module ScnEditor.dll [API v.060425]
Module RendezvousMFD.dll [API v.050206]
Module Rcontrol.dll [API v.050206]
Module RadarMFD.dll [API v.050206]
Module PEGAutopilot.dll [API v.060425]
Module OrlanMFD.dll [API v.060425]
Module OrbiterSound.dll [API v.060425]
Module orbHoverDust.dll [API v.060425]
Module NoseWheelTurn.dll [API v.060425]
Module Meshdebug.dll [API v.060425]
Module MercIPC.dll [API v.060425]
Module LandMFD.dll [API v.050206]
Module GPCMFD.dll [API v.060425]
Module Framerate.dll [API v.050206]
Module FlightData.dll [API v.050206]
Module ExtMFD.dll [API v.060425]
Module CustomMFD.dll [API v.060425]
Module AttitudeMFD.dll [API v.060425]
**** Creating simulation session
DirectDraw interface OK
Direct3D interface OK
Zbuffer: 16 bit
Render device: Fullscreen 1152 x 864
Device has no hardware T&L capability
Module Sun.dll [API v.050206]
VSOP87(E) Sun: Precision 1e-006, Terms 554/6634
Module Mercury.dll [API v.050206]
VSOP87(B) Mercury: Precision 1e-005, Terms 167/7123
Module Venus.dll [API v.050206]
VSOP87(B) Venus: Precision 1e-005, Terms 79/1710
Module Earth.dll [API v.050206]
VSOP87(B) Earth: Precision 1e-008, Terms 2564/2564
Module Moon.dll [API v.041022]
ELP82: Precision 1e-005, Terms 116/829
Module Mars.dll [API v.060425]
VSOP87(B) Mars: Precision 1e-008, Terms 6400/6400
Module Phobos.dll [API v.060425]
Module Deimos.dll [API v.060425]
Module Galsat.dll [API v.041022]
Module Jupiter.dll [API v.050206]
VSOP87(B) Jupiter: Precision 1e-006, Terms 1624/3625
Module Europa.dll [API v.041022]
Module Ganymede.dll [API v.041022]
Module Callisto.dll [API v.041022]
Module Satsat.dll [API v.050206]
Module Saturn.dll [API v.060425]
VSOP87(B) Saturn: Precision 1e-006, Terms 2904/6365
Module Mimas.dll [API v.050206]
SATSAT Mimas: Terms 113
Module Enceladus.dll [API v.050206]
SATSAT Enceladus: Terms 33
Module Tethys.dll [API v.050206]
SATSAT Tethys: Terms 101
Module Dione.dll [API v.050206]
SATSAT Dione: Terms 59
Module Rhea.dll [API v.050206]
SATSAT Rhea: Terms 68
Module Hyperion.dll [API v.050206]
SATSAT Hyperion: Terms 595
Module Iapetus.dll [API v.050206]
SATSAT Iapetus: Terms 605
Module Uranus.dll [API v.050206]
VSOP87(B) Uranus: Precision 1e-006, Terms 1827/5269
Module Miranda.dll [API v.060425]
Module Ariel.dll [API v.060425]
Module Umbriel.dll [API v.060425]
Module Titania.dll [API v.060425]
Module Oberon.dll [API v.060425]
Module Neptune.dll [API v.050206]
VSOP87(B) Neptune: Precision 1e-006, Terms 391/2024
Module Triton.dll [API v.060425]
Finished initialising world
Module Multistage2.dll [API v.050206]
**** WARNING: Mesh not found: .\Meshes\multistage\vernier_1.msh
**** WARNING: Mesh not found: .\Meshes\multistage\vernier_2.msh
Finished initialising status
Finished initialising camera
Finished initialising panels
OUIPC::Module Initialized
Finished setting up render state
**** WARNING: Mesh not found: .\Meshes\.msh
**** WARNING: Mesh not found: .\Meshes\.msh

I don't think there is supposed to be a vernier mesh, or the .ini file is not updated.

 

[MJR]

Delete the vernier meshes. Have you tried the newest update?

 

[Star Voyager]

Good morning genltlemen,
For Mr. MJR, I downloaded probably 10 minutes ago.