• ORBITER-FORUM will be temporarily closed at 2026-07-23 18:00 UTC while we complete some OF maintenance tasks. The amount of downtime is expected to take up to one hour, but probably less.

SSU public release comments/bug reports

Status
Not open for further replies.
just plain "JEM" with the "JEMRMS" attached, should give you what you are looking for.

They are two seperate meshes.
 
No joy. I replaced JEMbay with JEM and attached JEMRMS to JEM at 0:0 but still have JEMRMS poking through the flight deck with both versions of JEMRMS.ini
 
Er, it was never deployed in the bay.
 
Ben: You have to tweak SEQ_X line in the JEMRMS section of the scenario file.
 
If you are looking to have the RMS folded in the bay, you need to use JEMBAY. If you want to be able to move the RMS, you need to use JEM with JEMRMS attached.
 
OK I'll go back to JEMbay and "tweak" the SEQ=X line but that's in the JEMRMS.ini right?
 
BenSisko said:
"tweak" the SEQ=X line but that's in the JEMRMS.ini right?
Click to expand...
No. It's the scenario file. The lines are SEQ_x where X is the animation sequence number. Simply enter a scenario which has JEMRMS loaded and then quit. Then in the Current State scenario in the JEMRMS section you'll see several SEQ_ lines. Those are the ones you need to tweak.
 
Never be able to figure that out. I wouldn't anyway, and I made it. :)
 
Well, I've got good news and bad, and a question (though this may be more for David413). The launch was scrubbed due to weather but I've got the fix for the JEMRMS:
Code: 
JEMRMS:spacecraft\spacecraft3
  STATUS Orbiting Earth
  RPOS -1168081.60 4771705.60 -4591112.06
  RVEL 4662.441 -3614.100 -4951.395
  AROT 158.27 9.72 22.43
  ATTACHED 0:0,JEMbay
  NAVFREQ 0 0
  RCS 1
  CTRL_SURFACE 1
  CONFIGURATION 1
  CURRENT_PAYLOAD 0
  SEQ 0 -2 0.500000
  SEQ 1 -2 0.500000
  SEQ 2 -2 0.500000
  SEQ 3 -2 0.500000
  SEQ 4 -2 0.500000
  SEQ 5 -2 0.500000
  SEQ 6 -2 0.500000
END

Any suggestions on how to attach the OBSS to the starboard truss of ISS 10A2?

Thanks DaveS! Don't worry Donamy If you saw some of my earlier posts, I managed to lose SiameseCat's dll's twice in one machine :embarrassed:
 
Last edited:
You need my ISS experience for that. :)
 
What did I say about scrubbed launched and fiddlin' with Orbiter :)
 
SSU cockpit dissapeared

As the title says, the cockpit for SSU has dissapeared for me and it looks as if it is night time and the stars are out. It was just working for me and I loaded it back up and that happened. Here is the log. There is nothing relevant that I see that caused the problem. I absolutely did not mess with the meshes or cinfiguration files so this is confusing me. Any of you SSU team members if you could help me out that would be great. Not sure if you guys have gotten this problem though.


Code: 
**** Orbiter.log
Build Sep 29 2006 [v.060929]
Devices enumerated: 4
Devices accepted: 3
==> RGB Emulation
==> Direct3D HAL
==> Direct3D HAL (Intel(R)  G965 Express Chipset Family)
Found 0 joystick(s)
Module AtlantisConfig.dll [API v.060425]
Module DGConfig.dll [API v.060425]
Module TrackIR.dll [API v.060425]
TrackIR module not found.
Module ScnEditor.dll [API v.060425]
Module Rcontrol.dll [API v.050206]
Module OrbiterSound.dll [API v.060425]
Module Meshdebug.dll [API v.060425]
Module Framerate.dll [API v.050206]
Module FlightData.dll [API v.050206]
Module ExtMFD.dll [API v.060425]
Module CustomMFD.dll [API v.060425]
Module CamShake.dll [API v.050206]
Module GPCMFD.dll [API v.060425]
Module AutoFCS.dll [API v.050206]
Module UniversalPointing.dll [API v.060425]
Module CRT.dll [API v.060425]
 
Lol. I have been doing that. I tried different camera views, and a re installation.
 
MJR, can you copy the log file while Orbiter is running and post it? The log is cleared when you shut down Orbiter, so the log you're posted doesn't tell me anything. Does this occur with multiple scenarios?
 
Yes it does.Do you think it is caused by a conflicting module?
 
I doubt it's a conflicting module, but you should try it in a clean installation just in case (if you haven't already done this). Can you copy the log while Orbiter is running and post it? Orbiter clears the log when it shuts down, so the log posted above doesn't help.
 
Ok, here's another puzzle. I think I found a problem in the De-orbit scenario. As it stands, I'm unable to fire the RCS in either ROT or TRANS mode using either keypad or arrow key commands. If I edit the PRPLEVEL line to this (copied from Atlantis cockpit scenario):

Code: 
  PRPLEVEL 0:0.980 1:0.995 2:1.000 3:1.000 4:1.000 5:0.992 6:0.992 9:0.030

Then I can get rotation only via the keypad. What's up with this? The entire scenario is posted below:

Code: 
BEGIN_DESC
Contains the latest simulation state.
END_DESC
BEGIN_ENVIRONMENT
  System Sol
  Date MJD 54479.7322331713
  Context SSU
END_ENVIRONMENT
BEGIN_FOCUS
  Ship Atlantis
END_FOCUS
BEGIN_CAMERA
  TARGET Atlantis
  MODE Cockpit
  FOV 40.00
END_CAMERA
BEGIN_HUD
  TYPE Orbit
  REF AUTO
END_HUD
BEGIN_MFD Left
  TYPE Map
  REF Earth
  TRACK ON
END_MFD
BEGIN_MFD Right
  TYPE Surface
  SPDMODE 1
END_MFD
BEGIN_MFD 3
  TYPE Map
  REF Earth
  TRACK ON
END_MFD
BEGIN_MFD 4
  TYPE User
  MODE CRT
  Mode2 1
  Display 2
  Spec 0
END_MFD
BEGIN_VC
END_VC
 
BEGIN_SHIPS
Atlantis:SpaceShuttleUltra
  STATUS Orbiting Earth
  RPOS 1445897.75 1019976.76 6486978.20
  RVEL -4725.514 -5753.380 1956.487
  AROT 142.16 18.49 -43.19
  RCSMODE 2
  PRPLEVEL 0:0.980 1:0.995 2:1.000 3:1.000 4:1.000 5:0.992 6:0.992
  NAVFREQ 524 94
  CONFIGURATION 3
  OPS 304
  CARGODOOR 0 0.0000
  GEAR 0 0.0000
  RMS
  STBD_MPM
  LPROBEARM 0
  LPROBE 1
  RPROBEARM 0
  RPROBE 1
  LOMS 2
  ROMS 2
  AIR_DATA_PROBES 1.000000 1.000000
  BOILERN2SPLY0 0
  BOILERN2SPLY1 0
  BOILERN2SPLY2 0
  BOILERCNTLR0 0
  BOILERCNTLR1 0
  BOILERCNTLR2 0
  BOILERHTR0 2
  BOILERHTR1 2
  BOILERHTR2 2
  APUFUTKVLV0 0
  APUFUTKVLV1 0
  APUFUTKVLV2 0
  APUCNTLRPWR0 0
  APUCNTLRPWR1 0
  APUCNTLRPWR2 0
  HYDCIRCPUMP0 2
  HYDCIRCPUMP1 2
  HYDCIRCPUMP2 2
  APUAUTOSHTDN 0
  APUSPDSEL0 1
  APUSPDSEL1 1
  APUSPDSEL2 1
  APUCNTRL0 0
  APUCNTRL1 0
  APUCNTRL2 0
  HYDMNPMPPRESS0 0
  HYDMNPMPPRESS1 0
  HYDMNPMPPRESS2 0
  MPSENGPWR00 1
  MPSENGPWR01 1
  MPSENGPWR02 1
  MPSENGPWR10 1
  MPSENGPWR11 1
  MPSENGPWR12 1
  HEISOLA0 1
  HEISOLA1 1
  HEISOLA2 1
  HEISOLB0 1
  HEISOLB1 1
  HEISOLB2 1
  MPS0 1
  MPS1 1
  MPS2 1
  L_ET_UMB_DOOR 0.000
  R_ET_UMB_DOOR 0.000
  ET_DOOR_LATCHES 1.000000 0.000000 0.000000
  @SUBSYSTEM MPS_C
@ENDSUBSYSTEM  ;MPS_C
@SUBSYSTEM MPS_L
@ENDSUBSYSTEM  ;MPS_L
@SUBSYSTEM MPS_R
@ENDSUBSYSTEM  ;MPS_R
@SUBSYSTEM FMC1
@ENDSUBSYSTEM  ;FMC1
@SUBSYSTEM FMC2
@ENDSUBSYSTEM  ;FMC2
@SUBSYSTEM FMC3
@ENDSUBSYSTEM  ;FMC3
@SUBSYSTEM MMC1
@ENDSUBSYSTEM  ;MMC1
@SUBSYSTEM MMC2
@ENDSUBSYSTEM  ;MMC2
@SUBSYSTEM MMC3
@ENDSUBSYSTEM  ;MMC3
@SUBSYSTEM MMC4
@ENDSUBSYSTEM  ;MMC4
@SUBSYSTEM AMC1
@ENDSUBSYSTEM  ;AMC1
@SUBSYSTEM AMC2
@ENDSUBSYSTEM  ;AMC2
@SUBSYSTEM AMC3
@ENDSUBSYSTEM  ;AMC3
@SUBSYSTEM EIU1
@ENDSUBSYSTEM  ;EIU1
@SUBSYSTEM EIU2
@ENDSUBSYSTEM  ;EIU2
@SUBSYSTEM EIU3
@ENDSUBSYSTEM  ;EIU3
@SUBSYSTEM MTU
  MTU_MET_RUNNING 0
  MTU_MET0 0.000
  MTU_MET1 0.000
  MTU_MET2 0.000
   EVENT_TIMER0 0.000000 DOWN STOPPED
   EVENT_TIMER1 0.000000 DOWN STOPPED
@ENDSUBSYSTEM  ;MTU
@SUBSYSTEM IDP1
  IDP1 SPEC 65535
  IDP1 DISP 65535
@ENDSUBSYSTEM  ;IDP1
@SUBSYSTEM IDP2
  IDP2 SPEC 65535
  IDP2 DISP 65535
@ENDSUBSYSTEM  ;IDP2
@SUBSYSTEM IDP3
  IDP3 SPEC 65535
  IDP3 DISP 65535
@ENDSUBSYSTEM  ;IDP3
@SUBSYSTEM IDP4
  IDP4 SPEC 65535
  IDP4 DISP 65535
@ENDSUBSYSTEM  ;IDP4
@SUBSYSTEM IMU1
@ENDSUBSYSTEM  ;IMU1
@SUBSYSTEM IMU2
@ENDSUBSYSTEM  ;IMU2
@SUBSYSTEM IMU3
@ENDSUBSYSTEM  ;IMU3
@SUBSYSTEM GPC1
@ENDSUBSYSTEM  ;GPC1
@SUBSYSTEM GPC2
@ENDSUBSYSTEM  ;GPC2
@SUBSYSTEM GPC3
@ENDSUBSYSTEM  ;GPC3
@SUBSYSTEM GPC4
@ENDSUBSYSTEM  ;GPC4
@SUBSYSTEM GPC5
@ENDSUBSYSTEM  ;GPC5
@SUBSYSTEM ODS
  RING_STATE -1 0.0000
@ENDSUBSYSTEM  ;ODS
@SUBSYSTEM ADPS
  LEFT_AIRDATAPROBE 0 0 0.000000
  RIGHT_AIRDATAPROBE 0 0 0.000000
@ENDSUBSYSTEM  ;ADPS
@SUBSYSTEM -Y Star Tracker Door Motor
@ENDSUBSYSTEM  ;-Y Star Tracker Door Motor
@SUBSYSTEM -Z Star Tracker Door Motor
@ENDSUBSYSTEM  ;-Z Star Tracker Door Motor
@SUBSYSTEM ACBusSystem
@ENDSUBSYSTEM  ;ACBusSystem
@SUBSYSTEM INVERTER1
@ENDSUBSYSTEM  ;INVERTER1
@SUBSYSTEM INVERTER2
@ENDSUBSYSTEM  ;INVERTER2
@SUBSYSTEM INVERTER3
@ENDSUBSYSTEM  ;INVERTER3
@SUBSYSTEM APU1
  APU1_State 0
  APU1_FuelPress 0.000
  APU1_HydPress 0.000
  APU1_Speed 0.000
@ENDSUBSYSTEM  ;APU1
@SUBSYSTEM APU2
  APU2_State 2
  APU2_FuelPress 1462.755
  APU2_HydPress 3036.226
  APU2_Speed 119.914
@ENDSUBSYSTEM  ;APU2
@SUBSYSTEM APU3
  APU3_State 2
  APU3_FuelPress 1452.922
  APU3_HydPress 2975.860
  APU3_Speed 85.804
@ENDSUBSYSTEM  ;APU3
@SUBSYSTEM LATCH0
@ENDSUBSYSTEM  ;LATCH0
@SUBSYSTEM LATCH1
@ENDSUBSYSTEM  ;LATCH1
@SUBSYSTEM LATCH2
@ENDSUBSYSTEM  ;LATCH2
@SUBSYSTEM RMS
  RMS
  ARM_STATUS 0.500000 0.013600 0.014688 0.500000 0.500000 0.500000
  SHOULDER_BRACE 0.000
  GRAPPLE 1 1.0000
  RIGIDIZE 1 1.0000
  EXTEND 1 1.0000
  RMS_ELBOW_CAM 0.0000 0.0000
  RMS_ROLLOUT 0 0.0000
  RMS_LATCHES 0 0.0000
@ENDSUBSYSTEM  ;RMS
@SUBSYSTEM STBD_MPM
  STBD_MPM_ROLLOUT 0 0.0000
  STBD_MPM_LATCHES 0 0.0000
  STBD_MPM_ATTACHED_PAYLOAD Ultra_OBSS 0
@ENDSUBSYSTEM  ;STBD_MPM
END
Ultra_OBSS:spacecraft\spacecraft3
  STATUS Orbiting Earth
  RPOS 1445897.65 1019975.27 6486974.99
  RVEL -4725.514 -5753.380 1956.487
  AROT 142.16 18.49 -74.52
  ATTACHED 0:1,Atlantis
  NAVFREQ 0 0
  RCS 1
  CTRL_SURFACE 1
  CONFIGURATION 1
  CURRENT_PAYLOAD 0
END
CMGcovered:spacecraft\spacecraft3
  STATUS Orbiting Earth
  RPOS 1445897.65 1019975.27 6486974.99
  RVEL -4725.514 -5753.380 1956.487
  AROT 142.16 18.49 -74.52
  ATTACHED 0:2,ColESP
  NAVFREQ 0 0
  RCS 1
  CTRL_SURFACE 1
  CONFIGURATION 1
  CURRENT_PAYLOAD 0
END
Colex1:spacecraft\spacecraft3
  STATUS Orbiting Earth
  RPOS 1445897.65 1019975.27 6486974.99
  RVEL -4725.514 -5753.380 1956.487
  AROT 142.16 18.49 -74.52
  ATTACHED 0:0,ColESP
  NAVFREQ 0 0
  RCS 1
  CTRL_SURFACE 1
  CONFIGURATION 1
  CURRENT_PAYLOAD 0
END
ColESP:spacecraft\spacecraft3
  STATUS Orbiting Earth
  RPOS 1445897.65 1019975.27 6486974.99
  RVEL -4725.514 -5753.380 1956.487
  AROT 142.16 18.49 -74.52
  ATTACHED 0:5,Atlantis
  NAVFREQ 0 0
  RCS 1
  CTRL_SURFACE 1
  CONFIGURATION 1
  CURRENT_PAYLOAD 0
END
END_SHIPS
 
I believe you can set the thrusters in the CRT.
 
Status
Not open for further replies.

Similar threads

Peter Dow
Skyhook Equator. Orbiting Rotating Launcher Animator-Calculator.
Replies
1
Views
5K
Peter Dow
Peter Dow
TorchDesigner
Problem [Orbiter2024] Multiple Bugs with XR1 and Fly-by-Wire
Replies
1
Views
4K
dbeachy1
dbeachy1
dgatsoulis
Project VideoPlayerMFD -- Test thread [CLOSED]
Replies
7
Views
4K
misha.physics
misha.physics
dgatsoulis
Project Orbiter MediaPlayerMFD open for testing [CLOSED]
Replies
12
Views
5K
dgatsoulis
dgatsoulis
K
General Question New cross-platform Orbiter 2024 port
Replies
4
Views
257
kipkipkip
K
Back
Top