News Add-ons working in Orbiter 2016

[JonnyBGoode]

Has anybody tested any of the Hi-res runway textures for orbiter 2010 to see if they work in orbiter 2016?

I tried them, and they didn't seem to work.

 

[Interceptor]

I tried them, and they didn't seem to work.

I wonder if there is a way to tweak them to work with orbiter 2016?

 

[gattispilot]

The constellation program is kinda running. I am redoing the dlls so they will working 2016. Basically just removing the UCGO and Ummu.
There is something wrong in the cfg of the sol and earth and moon.

 

[francisdrake]

Q: Do we have a list of lunar landers that work with Orbiter 2016? I'd really like to be able to land a LEM on the Moon.

I just wanted to mention, that the MAV-05 is Orbiter 2016 compatible, including correct terrain recognition. For lunar landings include the keyword LUNAR in the scenario file.
This omits the HIAD heat shield and reduces the fuel of the ascent stage. With this reduced weight the MAV can make a purely propulsive landing on the Moon.

 

[gattispilot]

Thanks. I placed the MAV at Brighton. It looks a little too high.

I lifted up a little and set back down ok. Then lifted up and set down too hard:

---------- Post added at 07:07 AM ---------- Previous post was at 05:32 AM ----------

Has any tried Velcro in 2016? I get a angle ship rather than straight up.

 

[francisdrake]

I placed the MAV at Brighton. It looks a little too high.

Yes, I do have a problem with visual clipping of the feet in terrain. My ususal test area is the Gale crater on Mars. There the feet need to be slightly above ground, otherwise their lower parts gets visually clipped off. This leads to the vessel seeming to hover above ground, when landed on a landing pad. I am not quite sure how to handle that.

Currently the feet are quite soft (low spring stiffness). This causes the vessel to make a dip when landed too hard and jumping high, which usually leads to tipping over. It is not so easy to find good values for the new touchdown points (friction, spring and damping values). Maybe someone could provide a good working example?

 

[gattispilot]

I usually use Fred's calculation:
http://www.orbiter-forum.com/showthread.php?p=546788&postcount=91

 

[turtle91]

Orbiter Truss System v0.7 (Beta)
[ame="http://orbithangar.com/searchid.php?ID=6401"]http://orbithangar.com/searchid.php?ID=6401[/ame]

...and....

NotesMFD:
[ame="http://orbithangar.com/searchid.php?ID=3269"]http://orbithangar.com/searchid.php?ID=3269[/ame]


...seems to be working fine...:thumbup:

 

[ShuttleCommander]

NASSP and Orbiter 2016

I don't think that either AMSO or NASSP are working with 2016 yet.

Project-Apollo-NASSP-V7 works with High Res textures but most Scenarios don't work yet. The only prerecorded flight that works is the Apollo 7 one.

It can be found here: http://nassp.sourceforge.net/wiki/Main_Page

 

[ShuttleCommander]

any news on a new version of orbitersound for orbiter 2016? and also ummu and ucgo

OrbiterSound 4.0 is working in 2016.

 

[boogabooga]

OrbiterSound 4.0 is working in 2016.

Only partially. There are known bugs.

 

[gattispilot]

One I am testing is :
[ame="http://orbithangar.com/searchid.php?ID=3062"]http://orbithangar.com/searchid.php?ID=3062[/ame]

This seems good.
this one not so good:
http://orbithangar.com/searchid.php?ID=3177

I redid the scenario and got all to work but the Centrifuge. So this line that the base is attached to the Centrifuge is the issue.

BCFGN1:Spacecraft\spacecraft3
  STATUS Orbiting Earth
  RPOS -2891516.49 2482864.17 -5717310.94
  RVEL 6909.164 1275.563 -2940.218
  AROT -27.46 10.97 89.26
; ATTACHED 0:0,BCFG1
  DOCKINFO 0:0,BCFG1 2:1,BCFGT2 3:1,BCFGT1 4:1,BCFGT3 5:1,BCFGT4
  NAVFREQ 0 0
  RCS 1
  CTRL_SURFACE 1
  CONFIGURATION 1
  CURRENT_PAYLOAD 0
  SEQ 0 -2 0.000000
  SEQ 1 -2 0.000000
END

[PARENT_ATTACH_0]
NAME="rms"
POS=(0,0,2.375342)
DIR=(0,0,1)
ROT=(0,1,0)
LOOSE=0
RANGE=10
ID="GS"


[CHILD_ATTACH_0]
POS=(0,0,2.375342)
DIR=(0,0,1)
ROT=(0,1,0)
LOOSE=1
ID="CG1"

[CHILD_ATTACH_1]
POS=(0,0,-2.375342)
DIR=(0,0,-1 )
ROT=(0,1,0)
LOOSE=1
ID="CG2"



; ============================
; ===================
; ================
; ===== ARM =====
; ================
; ===================
; =============================

[ROBOTIC_ARM]
JOINT_0_NAME="Centrifuge_Spin"
JOINT_0_SEQ=0
JOINT_0_RANGE=(0,360)
JOINT_0_NAME="Centrifuge_ Attach"
JOINT_0_SEQ=0
JOINT_0_RANGE=(0,360)
GRAP_SEQ=1
GRAP_ATTACH=0

 

[galleto]

are there any ISS addons working in orbiter 2016?

 

[Donamy]

My ISS A2Z and all the addons after it.

 

[galleto]

My ISS A2Z and all the addons after it.

thank you! it looks awesome

 

[gattispilot]

My ISS A2Z and all the addons after it.

But are there some that get a CTD when you go to f1 view? Like thorton's? stuff

 

[Donamy]

Only.dll vessels crash when you select F1 view. All my A2Z stuff is SC3, which doesn't. I'll be posting a recompiled SSRMSD.dll compiled in 2016 build, by GLS (thank you)So the cameras will work. I don't have access to the JEMRMS code, so that cannot be recompiled.

 

[Vigilante]

Would anyone o. This thread know how to update the Vidinie orbit line drawing toolfor the 2016 edition?

 

[gattispilot]

Moonbase Alpha seems to work. Except fur the Ummu part. Eagles all work. But the crater that the base sits in needs flatten.

 

[Anroalh12]

Status MFD working with one problem (mfd display not fully scaled)
https://www.orbithangar.com/searchid.php?ID=3446