ARIANE 6

ARIANE 6 0.92

ARIANE 6

For Orbiter 2016
For Orbiter 2024 install Ariane 6 for Orbiter 2024

This is the English version (a French version is available on the Papy's Hangar).

04.jpg


This add-on is designed to be installed in addition to the KOUROU CSG Centre Spatial add-on v 5.1
(see explanations below)


DESCRIPTION:
Here is the new European Ariane 6 rocket in its 6.2 version (with 2 boosters) as it was for the inaugural flight (v 262) on July 9, 2024.

01.jpg


The payloads carried by this rocket are provided :
  • 9 small satellites (cube sat)
  • 4 experiments (fixed on the platform)
  • 2 reentry test capsules
09.jpg


You can do the first mission of this rocket either in automatic mode (you just have to watch) or in manual mode.


INSTALLATION:

1) Just extract the "zip" file into the main root folder of your Orbiter.
(If some files need to be overwritten, give permission.)

2) Installing the KOUROU CSG Centre Spatial v 5.1 add-on is recommended, but not mandatory


RECOMMENDED ADD-ONS:

OrbiterSound version 5 for Orbiter 2016 (essential)

Jarmonik's D3D9 Graphics Client (highly recommended)

KOUROU CSG v 5.1 to have all the buildings and launch zones of the Kourou Space Center.

FRENCH GUIANA SURFACE TILES
(To update some Kourou tiles and add Cayenne-Rochambeau tiles as well as many areas of French Guiana)

Note:
This add-on is designed to work even if the KOUROU CSG Space Center add-on is not installed.
If you install my "Ariane 6" add-on over my "Kourou-CSG" add-on, some files will be overwritten.
Don't worry, files are the same (assembly tower, mast, assembly building, etc.)
These last elements are not updated, same for the ground texture. Their appearance is very different from what they are (in reality) today.
I have planned, in a second step, to make an update for the ELA4 site because I made it a long time ago, when this site was only at the project stage.
So be indulgent about the realism of this area.

Add-on_En (small).jpg


Some essential modules are included in this add-on :
  • Spacecraft4 by Vinka
  • Multistage2015 by Fred18
  • VesselBuilder by Fred18


All the details and explanations of the mission are in the manual located in the folder ...\Doc\Ariane6.
Don't forget to "create the links" see page 19 of the doc

FUTURE UPDATES:
  • Improved surface tiles for the ELA4 area - grass - but also tar - have been growing since a long time)
  • The launch mast (the one provided is not conform to reality)
  • The Assembly building (same)
  • The launch platform, lightning pylons, flues, etc...

And if you want send a little word on the forum, don't hesitate, it's always a pleasure.
Also, if you find any issues, you can send me informations.
Supported Orbiter Version
  1. 2016
Author
jacquesmomo
Downloads
1,702
Views
4,722
First release
Last update

Ratings

4.33 star(s) 3 ratings

More addons from jacquesmomo

Latest reviews

Worked for me in 2024... The location coordinates are slightly off and can be tweaked but I've noticed that when using a 2016 addon in 2024... Otherwise, thank you for the rocket... *****
jacquesmomo
jacquesmomo
Thank you
I'm working on it to adapt this rocket and the ELA4 zone for Orbiter 2024.
Still few weeks...
Upvote 0
AMAZING MODEL!!!

Perhaps it's me, I can't seem to get to orbit. I have tried to reduce fuel to optimized levels and use the exact lofted trajectory ESA suggests. I always end up adding a bit of fuel late burn.

I NEED this to work on 2024 ASAP.

Thank you for making this!
jacquesmomo
jacquesmomo
I'm going to try to adapt this rocket for orbiter 2024...
Be patient.. 😉
Upvote 0
this rating may increase as I go deeper in the scenarii, but nice first try!
jacquesmomo
jacquesmomo
Thank you !
Upvote 0
Back
Top