This add-on contains the PA-38-112 aircraft based on Lua script.

The mesh (3D model) and textures are from the PA-38-112 "Tomahawk" add-on from FlightGear under GNU GENERAL PUBLIC LICENSE, Version 2:
https://github.com/awall086/pa38
Development thread:
https://forum.flightgear.org/viewtopic.php?f=4&t=42778
The author is Adrián Fernández Gómez (awall86).

The flight model is based on /Config/Vessels/DeltaGlider/Deltaglider.lua (Martin Schweiger, Gondos). Some parameters have been changed.

Required Orbiter version: Orbiter 2024
The add-on version: 1
The add-on author: misha.physics
The add-on license: GPLv2

INSTALLATION: Unpack this add-on into Orbiter main directory.

There are five scenarios located in /Scenarios/PA-38-112.

NOTES:
- use the standard commands for the main thruster, control surfaces, braking. Use DELETE/INSERT keys for the rudder trimmer
- there are five liveries
- control surfaces and yokes are animated
- lift-off speed is about 26 m/s
- its recommended to set the "VCNearPlane" parameter to be "0.01" for /D3D9Client.cfg

There are optional DDS textures upscaled with AI (the difference in only noticeable when very close to the aircraft).

This add-on was uploaded to the:
www.orbiter-forum.com

You can leave your comments/ask questions on the forum.

Thanks everyone for your help!


_______________________
July 19, 2025, Lviv
misha.physics